Battle Ground, WA Solar Installers: Solar Panel Installation Since 2010

Sunbridge Solar installs home solar in Battle Ground and the Clark County addresses around it. We pull the City of Battle Ground or Clark County permit and the Washington L&I electrical permit, file the Clark PUD interconnection, and put the panels on in two to three days.

Who installs solar in Battle Ground, WA?

Sunbridge Solar does. We are a Clark County company, not a national sales operation that subcontracts the roof work, and north county — Battle Ground, Brush Prairie, Hockinson — is a regular part of our week.

Check us before you call us

Our Washington credentials

Both numbers are on every quote we write.

Which parts of Battle Ground do you serve?

All of them. The one thing that changes from one address to the next is who issues your permit: inside city limits, the City of Battle Ground issues the building permit and Washington L&I issues the electrical permit; outside it, Clark County issues the solar permit and L&I still handles the electrical. We check the address before we quote so there are no surprises.

Inside Battle Ground city limits

City of Battle Ground building permit + L&I electrical permit

Good to know: the City takes applications through its online Customer Self Service portal, and we submit the whole package for you.

Battle Ground addresses in Clark County

Clark County solar permit + L&I electrical permit

Is your Battle Ground home a good candidate for solar?

Most Battle Ground homes are. Four things decide it: the roof — its direction, its pitch and how much life it has left — the shade on it, the size of your electrical service, and how much power you actually use. None of them depend on your zip code, and all four get checked on the first visit, before anyone talks about price.

Usually a yes

What we look for

Still worth a look

None of these is an automatic no

The only way to know for certain is to have someone look. We map a year of shade, check the service panel, size the system to your own Clark PUD bills rather than to the roof, and put a written number in front of you. No charge and no obligation.

What does a solar installer charge in Battle Ground?

The price depends on system size, your roof and whether you add a battery — not on your zip code. Battle Ground has more acreage lots than the rest of the county, and a shop, a well pump or a heat pump pushes a home toward the upper end of the 4 to 10 kilowatts we install most. Two things keep a Battle Ground quote simple:

1

No sales tax on the system or the labor

Washington exempts 100% of state and local sales tax on solar systems up to 100 kW, including installation labor, through 2029 (RCW 82.08.962). One exemption certificate at purchase, filed by us.

2

No rebate to chase

Clark Public Utilities does not offer a solar rebate and Washington has no state credit, so the number on the quote is the number you pay. The federal residential credit ended for systems placed in service after December 31, 2025 — see what changed.

For cost by system size, read our Clark County solar cost guide or run your bill through the Washington solar calculator. Then request a written quote.

Checked September 2026. Source: Washington Department of Revenue; RCW 82.08.962.

What permits does a Battle Ground solar install need?

Inside city limits, two: a building permit from the City of Battle Ground and an electrical permit from Washington L&I. The City takes applications through its online Customer Self Service portal, and we prepare and submit the package.

Inside city limits — City of Battle Ground

What we submit through the City’s Customer Self Service portal

City of Battle Ground Community Development, 109 SW 1st Street, Suite 127 — we deal with them, not you.

Outside city limits — Clark County

Brush Prairie, Hockinson and the other county addresses

Do HOAs in Battle Ground allow solar? Washington law (RCW 64.38.055) stops an HOA from banning solar panels outright. It can still set reasonable rules on placement and appearance — for example, that street-facing panels follow the roof slope — and we design to those rules in the newer subdivisions.

Checked September 2026. Sources: City of Battle Ground Community Development; Washington L&I; Clark County Community Development; RCW 64.38.055.

How does Clark Public Utilities net metering work in Battle Ground?

Every home in Battle Ground and the surrounding county is on Clark Public Utilities, and the PUD net-meters systems up to 100 kW. The power you send to the grid is banked as kilowatt-hour credits against your own later use; the summer surplus carries you through the dark months.

The Clark PUD process

What happens after the electrical inspection

No PUD solar rebate. Contact for net metering questions: (360) 992-3244.

Why we size to your usage, not your roof

The March 31 reset changes the math

Surplus you bank in July is worth full value in January, but anything still unused on March 31 goes to the utility without compensation. So we size a Battle Ground system to a year of your actual bills rather than to every square foot of south-facing roof. An oversized array looks impressive and gives value back to the PUD.

Our post on Washington net metering explains the math.

Checked September 2026. Source: Clark Public Utilities solar FAQ; RCW 80.60.030.

Does solar work on Battle Ground acreage and in north county outages?

Yes, and the bigger lots help. Two local things shape a Battle Ground design.

Room to work with

Ground mounts on acreage

On a lot with open ground and a shaded roof, a ground-mounted array is often the better answer: we can point it due south at the ideal tilt, keep it clear of the firs, and size it to a shop or a barn as well as the house. On a standard subdivision roof, we design around the roof planes you have.

Outages

North county lines run through trees and open country

Wind and ice storms take the power down more often here than in the city. A battery is the add-on we install most on Battle Ground homes: it keeps the well pump, the fridge, the freezer and the internet running until the PUD restores the line. See our home battery backup page.

Panels run on daylight, not heat. A cool, bright north-county afternoon is a good solar afternoon, and the rain keeps the panels clean.

How long does a Battle Ground solar install take, start to finish?

The panels go on in two to three days. Start to finish, from first call to switch-on, plan on eight to twelve weeks.

1

Consultation, design and a written quote

Your roof (or your ground), your shading and a year of your electric bills, then system size, equipment, warranty terms and price on one page.

2

Permits, install and inspection

City of Battle Ground or Clark County permit plus the L&I electrical permit, then two to three days on site, then the electrical inspection.

3

Utility interconnection and switch-on

Clark PUD’s four-working-day review and the meter swap within about five working days after that. Then you switch it on.

How does Sunbridge Solar compare to a national solar company in Battle Ground?

The panels are the same. What differs is who does the work. Most national companies that advertise in Battle Ground sell the system and subcontract the roof and the wiring, so the people who quote the job are not the people who install it. Sunbridge Solar designs, permits and installs with our own crew, under our own Washington electrical license.

Sunbridge Solar

One company from the site visit to the warranty call

Checking a national quote

Four things worth confirming in writing

How do I choose among solar companies in Battle Ground?

Most of the solar companies pitching Battle Ground are based in Portland or Vancouver, and some of the national ones sell here and subcontract the roof work. Four questions separate them quickly.

1

Are you licensed, and can I check?

Every Washington contractor has an L&I registration number and an electrical license number. Ours are SUNBRSL882NF and SUNBRSL857CK.

2

Who does the roof work?

Ask whether the crew on your roof works for the company on the contract. Ours does.

3

What are the two warranties?

Workmanship and product are different things. Get both in writing, with the years.

4

How did you size this?

Clark PUD credits reset every March 31, so an oversized system gives value back to the utility. An installer who pushes a bigger array than your bills support is selling panels, not savings.

We’re happy to be compared on all four

Ask us the same questions. We’ll put our answers in writing with your quote.

What Battle Ground customers say

Real Google reviews from homeowners across Battle Ground, Clark County and the Portland area.

ExcellentGoogle star 1Google star 2Google star 3Google star 4Google star 54.9120 reviews
4.9Google star 1Google star 2Google star 3Google star 4Google star 5
Excellent120 reviews

Battle Ground solar FAQs

The questions Battle Ground homeowners ask us most, answered plainly.

It depends on system size, roof type and whether you add a battery, so we quote every home individually. There is no sales tax on the equipment or labor for systems up to 100 kW through 2029, and no rebate to apply for afterward. Our Clark County solar cost guide breaks cost down by system size.

For most homes with a reasonably clear south-, east- or west-facing roof — or open ground for a ground mount — yes. It depends on your usage and your site, not on the city. Our Washington solar guide covers what to expect.

Yes. Inside city limits, a building permit from the City of Battle Ground and an electrical permit from Washington L&I. Outside city limits, a Clark County solar permit plus the L&I electrical permit. We prepare and submit all of it.

Usually, if you have open ground with a clear southern view. Ground mounts cost more in racking and trenching than a roof array of the same size, but they produce more when the roof is shaded or faces the wrong way. We price both when it is close.

Not in cash — in kilowatt-hour credits at full value against your own later use, banked until the March 31 reset. The interconnection application is usually processed within four working days.

Yes. Battery backup for outages and a Level 2 EV charger can go in alongside the solar, with the panel and wiring sized so the three work together.

The panels are the same; the crew is not. We design, permit and install with our own crew under our own Washington electrical license (SUNBRSL857CK), pull the City of Battle Ground or Clark County permit and the L&I electrical permit ourselves and file the Clark PUD interconnection, and answer the warranty call from our shop in Washougal. Before you sign with anyone, confirm whose crew will be on the roof and whose license the permit is pulled under.

Two to three days on site. Start to finish, including permits and the utility’s meter swap, plan on eight to twelve weeks.

Ready to go solar in Battle Ground?

Request a free, no-obligation quote and we’ll drive up from Washougal, look at your roof or your ground, and put a real number in writing.

Sunbridge Solar  |  421 C St Ste 5a, Washougal, WA 98671  |  360-313-7190

Scroll to Top