Guide To Your Envoy (S & IQ) Guide

The Envoy-S and Envoy-S Metered are  2nd generation monitoring products developed by Enphase Energy. Having both powerline communication (PLC) and WiFi capabilities to detect and send data from the microinverter to the Envoy-S, you can rely on this monitoring unit to send data to your solar system’s online dashboard.

MyEnlighten Login Portal 
Operational Manual

Top Questions

Read more questions at Enphase Homeowner Support Section

 

Blinking Light Chart

The LEDs on the Envoy-S are solid green when a function is enabled or performing as expected, flashing when an operation is in progress, or solid amber when troubleshooting is required.

 
 
Network-Communications-LED.png

Network Communications LED

  • Solid green – Communicating with Enlighten

  • Flashing Green WPS – Connection in progress or the Envoy-S is attempting to connect to Enlighten

  • Solid Amber – Local network connection only

  • Off – No network connection (contact Sunbridge)

 
 
AP-Mode-LED.png

AP Mode LED

  • Solid Green – AP mode enabled the Envoy built-in Wi-Fi network available

  • Off – AP Mode disabled and Envoy Wi-Fi network unavailable

 
 

Solar Power Production LED

  • Solid Green – All communicating microinverters are producing

  • Flashing Green – Microinverter update in progress

  • Solid Amber – At least one microinverter is not producing

  • Off – Microinverters are not communicating (low light or night time)

 
 
Device-Communication-LED.png

Device Communication LED

  • Solid Green – All microinverters are communicating

  • Flashing Green – Device scan in progress

  • Solid Amber – At least one microinverter is not communicating

  • Off – Microinverters are not communicating (low light or night time)

 
 
Device-Scan-Button.png

Device Scan Button

Press to start/stop a 15-minute scan for microinverters over the power line.